Eachine Tyro129 280mm FPV Racing Drone

$237.95

or 4 fortnightly payments of $59.49 with Afterpay More info

 

Great for:

  • Teenagers looking for the extra challenge of building their own racing drone (DIY build)
  • Long distance aerial flight
  • Aerial photography (camera not included)
Category:

Description

  1. This is the DIY version that comes unassembled.
  2. Comes without battery, charger, receiver or radio transmitter.
  3. The Session Camera is not included in the package.

 

Specifications
Brand Name: Eachine
Model: Tyro129
Item Name: 280mm F4 OSD DIY Version 7 Inch FPV Racing Drone
Version: PNP (Without Receiver, Battery , Radio Transmitter)

Item Specification
280mm Racing Frame Kit Wheel base: 280mmFrame arm thickness: 5mm

Upper plate thickness: 2mm
Bottom Plate Thickness: 2mm

Side plate thickness: 1.5mm

Frame kit material: 3K carbon fiber & CNC 6065 aluminium

2507 1800KV 3-5S Brushless Motor KV: 1800KVLipo cell: 3-5S

Weight: 39g
Motor Resistance: 0.0586Ω

Maximum pull: 1488g (4S 7inch propeller)

Maximum power: 840W

Configu-ration: 12N/14P
Motor Stator Diameter: 25mm
Motor Stator Thickness: 7mm
Motor Diameter: 30.8mm
Motor Length: 20mm
Whole shaft length: 35mm

Mounting holes distance: 16*16mm

Mounting holes: φM3

Recommend propeller: 6-7 inch

Eachine 4In1 40A BLHeli_S ESC Continuous current: 40ABurst current: 45A (10S)

BEC output: 5V @ 2A

Input voltage: 2-6S

Main control chip: 48mhz EFM8BB2

Firmware upgrade: Supports Dshot150-600/Multishot/Oneshot/PWM
MOS: 5X6
Current Sensor: NO

Size: 37.5×37.5mm
Mounting Hole: 30.5×30.5mm
Weight: 15g

Eachine GPS F4 Flight Controller Brand Name: Eachine
Model: GPS F4
Main control chip: STM32F405Gyroscope: MPU6000
Bameter: BMP280
Firmware: Support betaflight / INAV firmware

Integrated OSD, support betaflight configuration & DMA Mode ( F4 MCU controls OSD)

– Support PPM /DSM2/X / IBUS/ SBUS/ XBUS receiver
– with 10V @ 1.2A BEC Output, for VTX or Camera

– LED_STRIP solder pin, changing LED flashing mode & color via flight controller

– Buzzer solder pin, support connect external alarm buzzer

– with voltage detection port ( BAT) and current detection port ( CRT), to detect battery’s voltage and current
( Need connect extra current sensor module)
– with MicroSD Blackbox pad
– with 5 UART & I2C Port, for connecting GPS Module
– Plugs connector / Soldering Pads are Optional for all connector Port

Caddx.us Turbo f2 Camera Case size: 19x19x16mmWeight: 5.5g

Signal system: NTSC / PAL (Switchable)

Resolution ratio(horizontal center): 1200TVL

Video output Signal: cvbs
Image: 16:9

Synchronization method: inter-sync

Camera lens: standard 2.1mm

Lens operating voltage: DC 4.5-40V
S/N Ratio: >52dB (AGC OFF)
Audio: YES

5.8G 40CH 25/200/600mw switchable VTX  

Transmitting power:0/25/200/600mW switchable

Channel: 40CH

Full video format: NTSC/PAL

Input voltage: 7V~24V

Power dissipation: +12V@260mA/600MW
Transmitting Distance: ≥0.5km@25mW, ≥1km@200mW, ≥2km@600mW

Size: 36×36×5mm

Weight: ≤7g (except antenna)

BN220 GPS Module Item Name: GPS+GLONASS Dual GPS module
– Built-in FLASH, TTL
Data Protocol: NMEA-0183
Output Rate: 9600bps, 1HZ
Size: 22mm*20mm*6mm1.TX LED:blue.The data output, TX LED flashing2.PPS LED:red.PPS LED not bright when GPS not fixed,
flashing when fixed
DALProp T7056C 3-blade propeller Brand Name: DALProp
Model: CYCLONE T7056C
Material: PCMounting hole: 5mm

Quantity: 2 pairs

Color: Transparent White
Prop Spiral Diameter: 177.8mm
Hub Thickness: 8.26mm

Weight: 7.5g/ PC

Recommend Lipo Battery ( NOT Included) 5S 1600-2200mAh 50-85C Lipo Battery

Reviews

There are no reviews yet.

Be the first to review “Eachine Tyro129 280mm FPV Racing Drone”

Your email address will not be published. Required fields are marked *